NTA IMPRESSION COPING
PROSTHETIC COMPONENTS FOR THE IMPRESSION WORKFLOW
NTA Implant supplies prosthetic components informed by current implantology research. The range covers documented dental-implant indications for impression, laboratory, and restorative steps. Abutment options include hex, non-hex, angled, and straight designs in multiple diameters and gingival heights. Use the matching impression coping and analog per IFU.
PICK-UP IMPRESSION COPING
Packaging: impression post + guide pin
Hex and non-hex options
Long and short lengths
Narrow ( Ø 4.5 ) – Regular ( Ø 4.5 – Ø 5.5 )
Height: 10 – 13
Product code: PIC
TRANSFER IMPRESSION COPING
Packaging: impression post + guide pin
Hex type
Long and short lengths
Narrow ( Ø 4.0 – Ø 5.0 ) –
Regular ( Ø 4.0 – Ø 5.0 – Ø 6.0 )
Height: 11 – 14 Product code: TIC
LAB FIXTURE ANALOG
Used with the matching abutment
Narrow ( Ø 3.4 )
Regular ( Ø 3.7 – Ø 4.2 – Ø 4.6 – Ø 5.1 – Ø 6.0 )
Product code: LFA
SOLID LAB ANALOG
Diameter: Ø 4.5 – Ø 5.5 – Ø 6.5
Height: 4 – 5.5 – 7
Product code: SLA
MULTI ABUTMENT OPEN TRAY IMPRESSION COPING
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Diameter: Ø 4.8
Height: 11
Product code: MEOTIC 4811 H – MEOTIC 4811 NH
MULTI ABUTMENT LOW TEMPORARY CYLINDER
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Diameter: Ø 4.8
Product code: METC 48
MULTI ABUTMENT LOW PLASTIC CYLINDER
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Hex and non-hex options
Diameter: Ø 4.8
Height: 12
Product code: MEPC 4846 H – MEPC 4846 NH
MULTI ABUTMENT LOW TRANSFER IMPRESSION COPING
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Diameter: Ø 4.8
Height: 8
Product code: METIC 4880
MULTI ABUTMENT LOW HEALING CAP
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Diameter: Ø 4.8
Height: 4.6
Product code: MEHC 4880
MULTI ABUTMENT CEMENTED CYLINDER
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Hex and non-hex options
Diameter: Ø 5.0
Height: 6
Product code: MACC 5060 H – MACC 5060 NH
MULTI ABUTMENT LOW LAB ANALOG
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Product code: MELA 300
MULTI OUTER DRIVER
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Product code: MAOD
MULTI PICK-UP IMPRESSION COPING
The multi abutment is specified as a screw-retained substructure for crowns, bridges, hybrid prostheses, and bar attachments.
Product code: MEPIC 4810
OCTA OUTER DRIVER
The octa abutment is used for screw-retained prostheses in bridge cases.
Product code: OAOD
OCTA ABUTMENT PLASTIC CYLINDER
The octa abutment is used for screw-retained prostheses in bridge cases.
Hex and non-hex options
Diameter: Ø 4.8
Height: 10
Product code: POI 4810 N – POI 4810 H
OCTA ABUTMENT PROTECT CAP
The octa abutment is used for screw-retained prostheses in bridge cases.
Hex driver: 1.2mm
Tightening torque: 20Ncm
Diameter: Ø 4.8
Height: 4
Product code: OAPC 4840
OCTA ABUTMENT LAB FIXTURE ANALOG
The octa abutment is used for screw-retained prostheses in bridge cases.
Diameter: Ø 4.8
Height: 14
Product code: OALFA 4814
OCTA ABUTMENT PICK-UP IMPRESSION COPING
The octa abutment is used for screw-retained prostheses in bridge cases.
Hex driver: 1.2mm
Minimizes distortion
Packaging: impression post + guide pin
Diameter: Ø 4.8
Height: 10
Product code: OAIC 4810
BALL RETAINER - O-RING
Ball abutment components are specified for removable overdenture retention.
Product code: NTBA – NTBAO
BALL OUTER DRIVER
Ball abutment components are specified for removable overdenture retention.
Product code: NTBAD
BALL ABUTMENT LAB FIXTURE ANALOG
Ball abutment components are specified for removable overdenture retention.
Product code: BALFA 3512
N-LOC ANALOG
Product code: LOCAD
N-LOC OUTER DRIVER
Product code: LOCOD
MULTI PROFILE DRILL
Product code: NTA-0-65-01 / NTA-0-65-02
EZ SCREW
Product code: NTEZ 2247
Request clinical information
Use the form for product, library, or protocol questions. The clinical support team will reply.
